Instructions

The packaging opens like a clambshell and should not been to be cut or broken to get into it.

Using the letters on the racquet face, the design or your judgement, decide where the middle point is of the top edge of the racquet and remember it.

If you count 7 squares along the bottom edge of one of the protectors, that should be the middle point and this is where we will start from.

To make it easier, only unpeel half the backing paper and stick down the middle square / haxagon.  The bottom part of the hexagon should come on to the face of the racquet for best protection, although its up to you exactly how you place it.  See the photos below.

Use care and attention to stretch and pull the protector around the permimeter of the racquet.  Try to avoid creases and you should be able to follow the line of the edge of the racquet, keeping all the time one square / hexagon on the face.

You can lift up the protector once pressed down to try to get rid of creases, but the more times you do this, the less powerful will be the adhesion to the racquet.  Again, it should appear like the images below for best results.

Once this one half is correctly stuck, not worrying too much is its not totally perfect, repeat for the other half.  And once that half is done, do the same process again for the other protector on the other edge of the racquet.